Is It Safe to Drive With a C0460 Code?
Common Symptoms of a C0460 Fault
ESC / stability warning light
ABS warning light may illuminate
EML may illuminate
ESC system disabled
Possible Causes of C0460
A C0460 code can be triggered by faults across several systems. Identifying the exact root cause requires proper diagnostic equipment and live data — not just reading the code.
Steering Angle Sensor Wiring
Wiring or connector to the steering angle sensor is damaged.
Steering Angle Sensor Failure
The sensor itself has failed.
Sensor Calibration Lost
Sensor requires calibration after wheel alignment or sensor replacement.
CAN Bus Issue
Steering angle sensor signal not reaching ESC module on CAN bus.
Why we don't list the exact part: A C0460 code tells you what's happening but not why. Replacing parts without diagnosis is the most common way drivers waste money. A proper diagnosis identifies the specific cause first.
🔍 Get Your Exact Diagnosis
Find Out Exactly What's
Causing Your C0460 — £1.99
Causing Your C0460 — £1.99
MotorLoom cross-references your C0460 against known fault patterns for your exact make, model and mileage — giving you the most likely specific cause, UK repair cost and MOT risk instantly.
Most likely specific cause for your exact vehicle
UK repair cost estimate (parts + labour)
MOT pass/fail risk assessment
Whether it's safe to continue driving
Unlock My Full Diagnosis — £1.99 →
One-time £1.99 · Instant results · No subscription
£60
£1.99
C0460 and Your MOT
A stored C0460 fault code will cause your car to fail its MOT. The engine management light will be illuminated during the test — an automatic failure. Get the fault diagnosed and repaired, then have the code cleared before booking your test.