Is It Safe to Drive With a C0455 Code?
Common Symptoms of a C0455 Fault
ESC / stability warning light
ABS warning light
EML on in some cases
ESC system disabled or unreliable
Possible Causes of C0455
A C0455 code can be triggered by faults across several systems. Identifying the exact root cause requires proper diagnostic equipment and live data — not just reading the code.
Sensor Calibration Required
Steering angle sensor needs recalibration after alignment or replacement.
Sensor Partial Failure
Sensor element degraded giving out-of-range readings.
Wiring Intermittent Fault
Intermittent connection causing variable readings.
Steering Column Issue
Mechanical issue in the steering column affecting sensor.
Why we don't list the exact part: A C0455 code tells you what's happening but not why. Replacing parts without diagnosis is the most common way drivers waste money. A proper diagnosis identifies the specific cause first.
🔍 Get Your Exact Diagnosis
Find Out Exactly What's
Causing Your C0455 — £1.99
Causing Your C0455 — £1.99
MotorLoom cross-references your C0455 against known fault patterns for your exact make, model and mileage — giving you the most likely specific cause, UK repair cost and MOT risk instantly.
Most likely specific cause for your exact vehicle
UK repair cost estimate (parts + labour)
MOT pass/fail risk assessment
Whether it's safe to continue driving
Unlock My Full Diagnosis — £1.99 →
One-time £1.99 · Instant results · No subscription
£60
£1.99
C0455 and Your MOT
A stored C0455 fault code will cause your car to fail its MOT. The engine management light will be illuminated during the test — an automatic failure. Get the fault diagnosed and repaired, then have the code cleared before booking your test.