Is It Safe to Drive With a P2564 Code?
Common Symptoms of a P2564 Fault
EML on
Reduced power
Possible limp mode
Excessive smoke on acceleration
Possible Causes of P2564
A P2564 code can be triggered by faults across several systems. Identifying the exact root cause requires proper diagnostic equipment and live data — not just reading the code.
VGT Sensor Wiring Short
Sensor wiring shorted to ground causing low signal.
VGT Position Sensor Failure
Sensor failed with low output.
Connector Short
Moisture causing short in sensor connector.
ECU Input Fault
ECU input circuit for VGT position sensor.
Why we don't list the exact part: A P2564 code tells you what's happening but not why. Replacing parts based on the code alone is the most common way drivers waste money. A proper diagnosis identifies the specific cause first.
🔍 Get Your Exact Diagnosis
Find Out Exactly What's
Causing Your P2564 — £1.99
Causing Your P2564 — £1.99
MotorLoom cross-references your P2564 against known fault patterns for your exact make, model and mileage — giving you the most likely specific cause, UK repair cost and MOT risk instantly.
Most likely specific cause for your exact vehicle
UK repair cost estimate (parts + labour)
MOT pass/fail risk assessment
Whether it's safe to continue driving
Unlock My Full Diagnosis — £1.99 →
One-time £1.99 · Instant results · No subscription
£60
£1.99
P2564 and Your MOT
A stored P2564 fault code will cause your car to fail its MOT. The engine management light will be illuminated during the test — an automatic failure under current MOT standards. Even if the light temporarily clears, the code remains in ECU memory and can be read by testers.
Get the fault diagnosed and repaired first, then have the code cleared and confirm the light stays off before booking your MOT.