Is It Safe to Drive With a P2047 Code?
Common Symptoms of a P2047 Fault
P2047 Symptoms at a Glance
EML and AdBlue warning light
SCR system not functioning
NOx emissions increasing
Possible countdown to non-restart on some vehicles
Possible Causes of P2047
A P2047 code can be triggered by faults across several systems. Identifying the exact root cause requires proper diagnostic equipment and live data — not just reading the code.
Common Causes of P2047
AdBlue Injector Wiring Open
Open circuit in wiring to AdBlue injector.
AdBlue Injector Failure
The AdBlue injector itself has an internal open circuit.
AdBlue Line Fault
AdBlue supply line to injector is blocked or disconnected.
SCR Control Module Fault
SCR control unit output for the injector has failed.
Why we don't list the exact part: A P2047 code tells you what's happening but not why. Replacing parts without diagnosis is the most common way drivers waste money. A proper diagnosis identifies the specific cause first.
🔍 Get Your Exact Diagnosis
Find Out Exactly What's
Causing Your P2047 — 1st cause free, full report £1.99
Causing Your P2047 — 1st cause free, full report £1.99
MotorLoom cross-references your P2047 against known fault patterns for your exact make, model and mileage — giving you the most likely specific cause, UK repair cost and MOT risk instantly.
Most likely specific cause for your exact vehicle
UK repair cost estimate (parts + labour)
MOT pass/fail risk assessment
Whether it's safe to continue driving
Find Your Problem Now →
First cause free · Full report £1.99 · Instant results
1st cause FREE
Full report £1.99
P2047 and Your MOT
A stored P2047 fault code will cause your car to fail its MOT. The engine management light will be illuminated during the test — an automatic failure. Get the fault diagnosed and repaired, then have the code cleared before booking your test.