Is It Safe to Drive With a P0755 Code?
Common Symptoms of a P0755 Fault
Harsh gear changes
Limp mode
EML and transmission warning light
Stuck in one gear
Possible Causes of P0755
A P0755 code can be triggered by faults across several systems. Identifying the exact root cause requires proper diagnostic equipment and live data — not just reading the code.
Shift Solenoid B Wiring Fault
Wiring or connector to shift solenoid B is damaged.
Shift Solenoid B Failure
Solenoid B has failed mechanically or electrically.
Valve Body Issue
Fault in valve body affecting solenoid B's hydraulic circuit.
Fluid Contamination
Debris blocking solenoid B or its hydraulic passage.
Why we don't list the exact part: A P0755 code tells you what's happening but not why. Replacing parts based on the code alone is the most common way drivers waste money. A proper diagnosis identifies the specific cause first.
🔍 Get Your Exact Diagnosis
Find Out Exactly What's
Causing Your P0755 — £1.99
Causing Your P0755 — £1.99
MotorLoom cross-references your P0755 against known fault patterns for your exact make, model and mileage — giving you the most likely specific cause, UK repair cost and MOT risk instantly.
Most likely specific cause for your exact vehicle
UK repair cost estimate (parts + labour)
MOT pass/fail risk assessment
Whether it's safe to continue driving
Unlock My Full Diagnosis — £1.99 →
One-time £1.99 · Instant results · No subscription
£60
£1.99
P0755 and Your MOT
A stored P0755 fault code will cause your car to fail its MOT. The engine management light will be illuminated during the test — an automatic failure under current MOT standards. Even if the light temporarily clears, the code remains in ECU memory and can be read by testers.
Get the fault diagnosed and repaired first, then have the code cleared and confirm the light stays off before booking your MOT.