Is It Safe to Drive With a P0715 Code?
Common Symptoms of a P0715 Fault
Harsh or erratic gear changes
EML and transmission warning light
Possible limp mode
Speedometer issues in some vehicles
Possible Causes of P0715
A P0715 code can be triggered by faults across several systems. Identifying the exact root cause requires proper diagnostic equipment and live data — not just reading the code.
Input Speed Sensor Wiring Fault
Wiring or connector to the input speed sensor is damaged.
Input Speed Sensor Failure
The sensor itself has failed.
Reluctor Ring Issue
The ring the sensor reads is damaged or has debris.
Transmission Fluid Contamination
Metal debris in fluid coating the sensor.
Why we don't list the exact part: A P0715 code tells you what's happening but not why. Replacing parts based on the code alone is the most common way drivers waste money. A proper diagnosis identifies the specific cause first.
🔍 Get Your Exact Diagnosis
Find Out Exactly What's
Causing Your P0715 — £1.99
Causing Your P0715 — £1.99
MotorLoom cross-references your P0715 against known fault patterns for your exact make, model and mileage — giving you the most likely specific cause, UK repair cost and MOT risk instantly.
Most likely specific cause for your exact vehicle
UK repair cost estimate (parts + labour)
MOT pass/fail risk assessment
Whether it's safe to continue driving
Unlock My Full Diagnosis — £1.99 →
One-time £1.99 · Instant results · No subscription
£60
£1.99
P0715 and Your MOT
A stored P0715 fault code will cause your car to fail its MOT. The engine management light will be illuminated during the test — an automatic failure under current MOT standards. Even if the light temporarily clears, the code remains in ECU memory and can be read by testers.
Get the fault diagnosed and repaired first, then have the code cleared and confirm the light stays off before booking your MOT.