Is It Safe to Drive With a P0302 Code?
Common Symptoms of a P0302 Fault
Rough idle and vibration
Hesitation under load
EML on — flashing indicates severe misfire
Power loss
Fuel smell
Possible Causes of P0302
A P0302 code can be triggered by faults in several different vehicle systems. Identifying the specific root cause requires proper diagnostic equipment and live data analysis — not just reading the code itself.
Ignition System — Cylinder 2
Ignition component serving cylinder 2 is not performing correctly.
Fuel Delivery — Cylinder 2
Fuel not reaching cylinder 2 consistently.
Compression Issue — Cylinder 2
Mechanical condition affecting cylinder 2 combustion.
Wiring Fault
Circuit fault serving cylinder 2.
Why we don't list the exact part: A P0302 code tells you what's happening but not why. Replacing parts based on the code alone without proper diagnosis is the most common way drivers waste money. A proper diagnosis identifies the exact cause first.
🔍 Get Your Exact Diagnosis
Find Out Exactly What's
Causing Your P0302 — £1.99
Causing Your P0302 — £1.99
MotorLoom cross-references your P0302 against known fault patterns for your exact make, model and mileage — giving you the most likely specific cause, UK repair cost estimate and MOT risk instantly.
Most likely specific cause for your exact vehicle
UK repair cost estimate (parts + labour)
MOT pass/fail risk assessment
Whether it's safe to continue driving
Unlock My Full Diagnosis — £1.99 →
One-time £1.99 · Instant results · No subscription
£60
£1.99
P0302 and Your MOT
A stored P0302 fault code will cause your car to fail its MOT. The engine management light will be illuminated during the test, which is an automatic failure under current MOT testing standards. Even if the light clears temporarily, the code remains in the ECU memory and can be read by the tester's equipment.
Get the fault properly diagnosed and repaired first — then have the code cleared and confirm the light doesn't return before booking your test.