Is It Safe to Drive With a P0235 Code?
Common Symptoms of a P0235 Fault
EML on
Possible limp mode
Loss of power
Hesitation under acceleration
Possible Causes of P0235
A P0235 code can be triggered by faults across several systems. Identifying the exact root cause requires proper diagnostic equipment and live data — not just reading the code.
Boost Sensor Wiring Fault
Wiring or connector to the boost pressure sensor is damaged.
Boost Sensor Failure
The sensor itself has failed.
Boost Pipe to Sensor Blocked
Boost pipe feeding the sensor is blocked or disconnected.
ECU Signal Fault
The boost sensor signal is not reaching the ECU correctly.
Why we don't list the exact part: A P0235 code tells you what's happening but not why. Replacing parts based on the code alone is the most common way drivers waste money. A proper diagnosis identifies the specific cause first.
🔍 Get Your Exact Diagnosis
Find Out Exactly What's
Causing Your P0235 — £1.99
Causing Your P0235 — £1.99
MotorLoom cross-references your P0235 against known fault patterns for your exact make, model and mileage — giving you the most likely specific cause, UK repair cost and MOT risk instantly.
Most likely specific cause for your exact vehicle
UK repair cost estimate (parts + labour)
MOT pass/fail risk assessment
Whether it's safe to continue driving
Unlock My Full Diagnosis — £1.99 →
One-time £1.99 · Instant results · No subscription
£60
£1.99
P0235 and Your MOT
A stored P0235 fault code will cause your car to fail its MOT. The engine management light will be illuminated during the test — an automatic failure under current MOT standards. Even if the light temporarily clears, the code remains in ECU memory and can be read by testers.
Get the fault diagnosed and repaired first, then have the code cleared and confirm the light stays off before booking your MOT.