Is It Safe to Drive With a P0206 Code?
Common Symptoms of a P0206 Fault
Cylinder 6 misfire
Rough idle
EML on
Loss of power
Possible Causes of P0206
A P0206 code can be triggered by faults across several systems. Identifying the exact root cause requires proper diagnostic equipment and live data — not just reading the code.
Injector Wiring Fault
Open circuit wiring to cylinder 6 injector.
Connector Failure
Connector to cylinder 6 injector has failed.
Injector Solenoid Failure
Cylinder 6 injector internal open circuit.
ECU Driver Circuit
ECU output for cylinder 6 injector has failed.
Why we don't list the exact part: A P0206 code tells you what's happening but not why. Replacing parts without diagnosis is the most common way drivers waste money. A proper diagnosis identifies the specific cause first.
🔍 Get Your Exact Diagnosis
Find Out Exactly What's
Causing Your P0206 — £1.99
Causing Your P0206 — £1.99
MotorLoom cross-references your P0206 against known fault patterns for your exact make, model and mileage — giving you the most likely specific cause, UK repair cost and MOT risk instantly.
Most likely specific cause for your exact vehicle
UK repair cost estimate (parts + labour)
MOT pass/fail risk assessment
Whether it's safe to continue driving
Unlock My Full Diagnosis — £1.99 →
One-time £1.99 · Instant results · No subscription
£60
£1.99
P0206 and Your MOT
A stored P0206 fault code will cause your car to fail its MOT. The engine management light will be illuminated during the test — an automatic failure. Get the fault diagnosed and repaired, then have the code cleared before booking your test.