Is It Safe to Drive With a C0710 Code?
Common Symptoms of a C0710 Fault
C0710 Symptoms at a Glance
Steering or ESC/traction control warning light on
Heavier than normal steering
Stability control disabled
Steering wheel position sensor reads off-centre
Possible Causes of C0710
A C0710 code can be triggered by faults across several systems. Identifying the exact root cause requires proper diagnostic equipment and live data — not just reading the code.
Common Causes of C0710
Lost Calibration
Common after a wheel alignment, battery disconnect or steering component replacement.
Sensor Fault
The steering angle sensor itself has failed.
Wiring or Connector Fault
Damage in the harness or clock spring connector.
Clock Spring Fault
The rotating connector under the steering wheel has failed.
Why we don't list the exact part: A C0710 code tells you what's happening but not why. Replacing parts without diagnosis is the most common way drivers waste money. A proper diagnosis identifies the specific cause first.
🔍 Get Your Exact Diagnosis
Find Out Exactly What's
Causing Your C0710 — 1st cause free, full report £1.99
Causing Your C0710 — 1st cause free, full report £1.99
MotorLoom cross-references your C0710 against known fault patterns for your exact make, model and mileage — giving you the most likely specific cause, UK repair cost and MOT risk instantly.
Most likely specific cause for your exact vehicle
UK repair cost estimate (parts + labour)
MOT pass/fail risk assessment
Whether it's safe to continue driving
Find Your Problem Now →
First cause free · Full report £1.99 · Instant results
1st cause FREE
Full report £1.99
C0710 and Your MOT
A steering or stability-control warning light illuminated for this fault will cause your car to fail its MOT. Get the fault diagnosed and, if needed, have the steering angle sensor recalibrated before booking your test.